• Overview

    TCS Digital Solutions TurboWizard Upgrade
    Do you own a Wizard? Time to Turbo Charge it!
    • Upgrade existing equipment for less than new
    • Finishing speeds of up to 70 feet/minute
    • Optional longer cut lengths
    • Upgraded & easy to use User Interface
    • Simple to setup with real units
    • Auto calculation label/cycle & labels/ hour, plus time to finsh current job
    • Remote Support with Live Video
    We develped the only complete Wizard upgrade that leverages your existing investment in finishing equipment. And now its available to you as well.

    Design Goals
    We set the same two design goals as when we design our own products:
    • Make it easy to use
    • Make it easy to support
    So while our overall objectives were to make it faster and have a longer cut length, we made sure to accomplish this while making it easier to use and easier to support. Its more productive and therefore more profitable for you.

    The User Interface
    We reinvented the User Interface (UI) to make sense. On our UI, terms make sense. Take the "Die Lead In" for instance. This is the distance from the edge of the die plate to the die line. And when adjusting the cut position, again, its based on inches (or millimeters), so it's easy to accurately adjust.

    Production Simplified
    We didn't stop with just making the UI easier to use. We made production simpler to understand as well. On the Turbo Wizard, you enter the values for the labels you plan to cut. Enter the label length and the gap between labels. Then enter the number of cavities (rows) in the die -i.e. 2-around, 3-around etc. The TurboWizard automatically calculates the system repeat based on that information. There's no more math required to figure out the repeat you are trying to cut.

    The last thing that needs to be entered for the setup - the number of labels across the web (columns). By entering this number, the TurboWizard will automatically determine the number of labels per cycle and will show you the time (in minutes and seconds) needed to complete the desired number of labels at the current speed (in inches/second) set.

    Make Blank Labels
    Another deficiency in your current Wizard is the lack of ability to make black labels with a normal gap. On the standard Wizard, blank labels require you to run the machine in "rotary" mode. This means, that the gap between label cycles will be the difference between 17" and the die cutting area. So if you were running one 4" x 6" die cavity, the gap between labels would be 11". Or even worse, if you were running two cavities (the maximum on the standard machine, the gap between the first two labels would be 1/8" (assuming that's built into the die) and between the 2nd & 3rd labels would be 4 7/8". Hardly useful for any kind of production.

    With the Turbo Wizard we solved this issue. Now, you can produce blank labels with any size gap you desire. Just enter the gap into the Touch Screen, and this is the gap the labels will have. Simple. Easy to use. More flexibility for production.

    The end result of all these changes are a Turbo Charged Wizard. With your own piece of equipment upgraded, you will now be 2 to 3 times more productive, with more flexibility & your operator will be much happier as well.

    Contact us today to talk about your Wizard upgrade. Call us or click This email address is being protected from spambots. You need JavaScript enabled to view it. to get started, 1-678-824-2304.
  • Tech Specs

    Speed: Up to 70 fpm
    Cut Area:
    Width: Up to 10" (254mm)
    Length: 15" (381mm) Std - Optional 21"
    Media Sensor: Reflective (Black Mark)
    Remote Support: With Camera and Microphone for additional training & support
    Connectivity: 10/100 BaseT Ethernet, RJ-45 connection

    Media Diemensions:
    Max Width: 10"(254mm)
    Roll Capacity:
    Unwind: Up to 14" (356mm)
    Laminate: Up to 14" (356mm)
    Rewind: Up to 14" (356mm)
    Waste Matrix: Up to 14" (356mm)

    Operating Environment:
    Power: 120/240V, 50-60, 10 Amp Max
    Dimensions: 50"w x 30"d x 48"h

  • Buy

    Upgrade your Wizard to a Turbo Wizard!

For more information call 1-678-824-2304, or This email address is being protected from spambots. You need JavaScript enabled to view it. us.

Copyright 2009-2018, TCS Digital Solutions, LLC. All Rights Reserved.      Privacy Policy  |  Terms of Use  |  Legal  | Site Map